A dual-band wifi router that is compatible with the AiMesh system and also with Windows 11 is a required networking device at your place. That’s why the Asus RT-AX3000 setup is a need of every home and of every workplace. Yes, this wifi 6 has superior compatibility with other networking and smart devices. RT-AX3000 router delivers an ultra-fast internet speed with 3000Mbps on one band and 1200Mbps on the second band. Because of 802.11ax OFDMA – the bandwidth is fully utilized while providing four times better network capacity and efficiency to your home network. This all means that you can forget the lagging and latency issues with the Asus RT-AX3000 setup.
The wifi serves up to 80% better than usual’s, and the battery life of this Asus router is at least seven times better. Your networking needs get fulfilled in a seamless way with this router. Now, we shall further lead towards the configuration of the Asus RT-AX3000 wifi router, so you may use the benefits as quickly as possible.
Setup Asus RT-AX3000 router
There are two basic ways through which one can complete the Asus RT-Ax3000 wifi setup; one being the wireless way and another being the wired way. Before rushing to any way of setup, kindly disconnect all the cables of the home modem and reboot it. In case your home modem is run n batteries, then take them out too.
Wired setup
- Keep the home modem, computer system/ laptop, and Asus router in the same room.
- For the second step, insert the Asus RT-AX3000 router in a power plug.
- Take an Ethernet cable to connect the cable’s one end to the LAN port of the router and another end to the computer.
- Once done, check for the LAN LED indicator because it should be blinking.
- We hope you have another Ethernet cable too because this other one is required in forging the connection between the modem and Asus router.
- Now you may plug in your home modem to the power socket.
Wireless setup
- For the beginning, keep the home modem, computer system, and Asus router in the same room.
- Now, plug in the router in the power plug for further steps.
- Here we need one Ethernet cable to connect your home modem to the Asus router’s WAN port.
- Be sure of the thing that the WAN LED indicator is blinking.
- Now install IEEE 802.11a/b/g/n/ac/ax WLAN in the computer system for further configuration.
How to log in to Asus RT-AX3000?
- Open the web browser on your computer.
- Launch the web address router.asus.com in the search engine.
- Asus router RT-AX3000 login page will open in the browser.
- The default login credentials are required here, which are admin for the username and admin for the password too.
- Hit the login button, and now you may configure and customize your new Asus setup as you wish.
Now enjoy those lag-free gaming marathons and late movie nights. In case you still find it hard or you are just unable to configure your Asus RT-AX3000 router, then please reach out to our team. We are here to provide Asus router support to you.